Trombone Valve Nozzle Holder 20.0073

Description

MTM Hydro’s Trombone Valve Nozzle Holder offers a 2-in-1 for high pressure cleaning combined with low pressure chemical application. This new favorite of the Soft Wash Industry is practical, economical, and is installed quickly on any 1/4″ M NPT lance or plug. For setup, install the 1/4″ threaded high pressure nozzle your pressure washer requires on the top port along with a 1/4″ threaded chemical nozzle at the bottom port. Pressure relief is fast and only requires that you release the gun trigger, pull the valve stem to open the low pressure side and re-engage the spray gun. Do not pull valve stem while under pressure as this may cause injury.

• 1/4″F Inlet x Twin 1/4″F Outlets
• Max – 4,000 PSI
• Max – 8 GPM
• Max – 195° F